How Much Does a Kitchen Renovation Cost? [2026 Guide]
Kitchen renovations in 2026 cost $15,000 to $75,000. See costs by scope, square foot, component and region, how much to spend, and where you can cut the bill.
![How Much Does a Kitchen Renovation Cost? [2026 Guide]](https://images.tald.co/cdn-cgi/image/width=1920,quality=90,fit=scale-down,format=auto/vendors/Summer_Little/uploads/1754948537059_01_PrescottDesign_Zarb_0252.jpg)
Most kitchen renovations in 2026 cost about $15,000 to $75,000, and a typical mid-range project lands around $27,000 to $35,000. Where yours falls depends on the scope of work and the size of the room. The materials you pick matter too, and so does what labor costs where you live. In this guide, we'll walk through the cost by scope, square footage, component and location, and then look at how much to spend and how to save.

Interior Design: JoAnna Baum Interiors / Photography: Jeffrey Johnson
Kitchen Renovation vs. Remodel
The two words get used as if they mean the same thing, but they point to different budgets.
A remodel changes the space. It can mean moving walls, plumbing or wiring, all the way up to a full structural overhaul. A renovation keeps the footprint and refreshes what is already there, with refaced cabinets and new fixtures and finishes. Because nothing moves, it usually costs less.
Most cost data uses "remodel" for both, so the figures below cover the full range, from a simple refresh to a gut job.
Kitchen Renovation Cost by Scope
Most kitchen projects fall into one of three budget bands. Chances are, one of them will sound a lot like your plans.
Scope | Cost Range | Right for you if... |
|---|---|---|
Cosmetic Updates | $15,000 to $25,000 | You want the kitchen to look new while the walls and layout stay where they are. |
Mid-Range Renovation | $30,000 to $50,000 | You want better function, more storage and higher-quality finishes. |
Full Renovation | $60,000 to $100,000+ | You want to redesign the whole room, with a new layout and top-tier materials. |
Cosmetic Updates: $15,000 to $25,000
This tier refreshes the kitchen you already have. It usually starts with the cabinets, which get refaced or painted, along with new hardware. The walls get a fresh coat of paint. From there, you might add a new sink and faucet, a lower-cost countertop upgrade and new flooring, all while the layout stays as it is.
It suits a kitchen that works well but looks dated. It's also a smart move for sellers who want the room to show well before listing, and for new owners who want to make the space feel like theirs.
Can you renovate a kitchen for $10,000 or $15,000? Yes, if it's a small cosmetic refresh. Minor remodels start around $10,000. At that budget, your money goes furthest when you keep the layout and the cabinet boxes and put it toward paint and hardware, along with counters and fixtures.

Interior Design: Lighthouse Home and Design / Photography: East & Lane
Mid-Range Renovation: $30,000 to $50,000
Most kitchens that get a complete update land in this tier. You get semi-custom cabinets and quartz countertops, plus new flooring and lighting. A full set of new appliances comes with it. You might also add a small island, and there may be some moderate plumbing or electrical work.
The sink and range usually stay close to where they are now. That keeps labor in check, because the plumber and electrician aren't rerouting lines across the room.
This tier is a good fit if you care more about how your kitchen works every day, and how much it stores, than about a magazine-style reveal.
Is $30,000 enough to renovate a kitchen? It can be. $30,000 is close to what a typical project costs, but it sits at the low end of this tier, so it works best if you keep the existing layout and go with mid-grade finishes.

Interior Design: SUGARHOUSE / Photography: Jacob Snavely
Full Renovation: $60,000 to $100,000+
At this level, the kitchen gets a new layout, often with walls moved or removed. You're also looking at custom cabinets and stone surfaces, with built-in or professional-grade appliances.
Once plumbing moves or walls come down, costs climb quickly. Each change brings in more trades, more permits and more labor hours. Luxury projects often go past $100,000, and full structural work can reach $130,000 to $150,000 or more.
A full renovation makes sense if you plan to stay in the home for years, or if the rest of the house is already finished to a high level.
Kitchen Renovation Cost per Square Foot
In most U.S. markets, a kitchen renovation costs $75 to $250 per square foot. In premium metros, it runs $200 to $350, and luxury projects in New York City or the Bay Area can pass $500 per square foot.
Size matters because it sets how much material you buy and how long the crew works. A bigger room needs more cabinets, more flooring, more backsplash tile and more lighting. A 300 sq ft kitchen often costs far more than a 150 sq ft one at the same finish level.
Take a 10x10 kitchen as an example. A 100 sq ft kitchen runs about $7,500 at $75 per sq ft, or $25,000 at $250 per sq ft.
For a quick estimate, you can multiply your kitchen's square footage by the midpoint of the per-square-foot range for your market, then add 15% to 20%. This math leaves out plumbing moves, electrical upgrades and structural work, which can change the total a lot.

Interior Design: Carter Design / Photography: Chris Mottalini
Kitchen Renovation Cost Breakdown by Component
The most expensive part of redoing a kitchen is the cabinets. They take 29% to 40% of the budget, and labor comes next.
Component | Share of budget | Typical cost |
|---|---|---|
Cabinets and installation | 29% to 40% | $100 to $1,200+ per linear foot |
Labor | 20% to 35% | Varies by region and trade |
Appliances | 10% to 20% | $125 to $5,000+ per appliance |
Countertops and backsplash | 10% to 15% | $500 to $10,000+ for counters |
Flooring and lighting | 5% to 10% | $3 to $15 per sq ft for flooring |
Plumbing | About 6% | Depends on whether fixtures move |
Permits and design fees | 3% to 8% | $500 to $2,000 for permits |
Contingency | 10% to 20% on top | Set aside before work starts |
These ranges overlap and won't add up to exactly 100%, but they give you a good sense of which parts weigh most.
You can also start from your total budget. If you share that number with a builder, they can help you work out how to split it. They'll price their own carpentry and painting first, then let you know how much is left for tile, the counter slab and appliances.

Interior Design: Studio Isaac / Photography: Max Lemoine of Make Collective
Cabinets
Cabinets are the single biggest cost, and they take the longest to plan and order. Here's what they typically cost per linear foot.
- Stock: $100 to $300. Standard sizes and limited finishes.
- Semi-custom: $150 to $700. More flexible sizing and more finish choices.
- Custom: $500 to $1,200+. Built to your exact specs.
For a kitchen with 20 to 25 linear feet of cabinets, that's roughly $2,000 to $30,000 for the cabinet boxes alone.
If you'd like to spend less, you can reface the cabinets (keep the boxes and replace the doors and drawer fronts) or repaint them. For a flat-pack option, IKEA's sample kitchen packages start at $17,976.77 for a medium kitchen and $25,512.84 for a large one, before installation.
Countertops and Backsplash
Countertops and backsplash take 10% to 15% of the budget. Here's what countertops typically cost in total, by material.
- Laminate costs about $500 to $2,000.
- Quartz runs $3,000 to $8,000.
- Natural stone, like marble or quartzite, costs about $2,000 to $7,000, and more for rare slabs or large kitchens.
A backsplash adds $500 to $1,700 in total, or $15 to $40 per sq ft. Ceramic and subway tile cost less than marble or mosaic.
Appliances
Appliances take 10% to 20% of the budget. A dishwasher usually costs $700 to $2,000 and a refrigerator $1,000 to $3,000. An induction stove runs $1,500 to $4,000.
Professional-grade appliances run $2,000 to $5,000 or more each. Induction cooktops and connected refrigerators can add $2,000 to $8,000 over a basic set.
Flooring and Lighting
Together, these take about 5% to 10% of the budget. Installed flooring runs $3 to $7 per sq ft for vinyl plank and $5 to $15 per sq ft for tile.
Light fixtures range from a few hundred dollars to four figures each. Even so, new lighting is one of the less expensive upgrades that changes how a kitchen feels.
Labor, Plumbing and Electrical
Labor is usually the second-biggest cost, at 20% to 35% of the budget. In a small 10x10 kitchen, it can reach 50% to 60%. At TALD, we've put together a guide to general contractor fees that walks through how builders price their work.
Typical trade rates are $45 to $200 per hour for plumbers and $50 to $130 per hour for electricians, often plus a service-call fee. Plumbing costs stay fairly low if the sink stays where it is. Moving drains or water lines raises them sharply.
Permits, Design Fees and Hidden Costs
Permits run $500 to $2,000, depending on scope, and your builder often handles them for you.
Designers charge $100 to $200 per hour or a flat $1,500 to $5,000. If you only need focused help, such as finalizing a kitchen layout or choosing between cabinet and counter options, you can book a virtual consultation with an interior designer on TALD. Each professional sets their own rate, shown upfront on their profile. Starting prices run from $90 to $700, and $250 is the most common.
Then there are the costs no one sees until the walls are open. It might be old plumbing or wiring, or a leak. It might be a weak subfloor, or a wall that needs extra support. Older homes are the most likely to have them, and your 10% to 20% contingency is there to cover them.
What Drives Kitchen Renovation Costs Up
Most of the numbers above move with a handful of choices:
- Material quality: marble, exotic granite, custom cabinets and commercial-grade appliances push costs up fast.
- Kitchen size: more square footage means more cabinets and counters. It also means more flooring and drywall.
- Labor and location: local rates and how busy builders are in your area both shape your quote.
- Tariffs: many cabinets and appliances are imported, and so are many fixtures. When tariffs hit steel, aluminum, wood or finished cabinets, that cost can be passed on to homeowners.
- Scope creep: if you decide you want a second oven after the builder has priced the job, it becomes what's called a change order, and you'd pay the difference plus their fee on that change.
Changing the layout is often the biggest cost driver. In our experience, the first thing a builder asks is whether the sink will stay where it is. If you have a gas stove, they ask the same about the stove. Those two answers can move the price a lot.
Kitchen Renovation Cost by Region
Labor rates, permit rules, how available builders are and the cost of living all vary by area. So the national average may not match what you'll pay locally.
High-cost areas come in above the national average. In Zonda's 2025 Cost vs. Value data, a midrange major kitchen remodel costs about 9% more in New York City and about 18% more in San Francisco.
Mid-size metros are often near or a little below national averages. In the same data, Raleigh, Charlotte and Columbus came in 3% to 7% under the national figure for that project. Lower-cost large metros like Houston and St. Louis sit near or just under national numbers.
The best way to get a true local number is to collect two or three quotes and ask each builder for a line-item budget and a week-by-week schedule of work. If a builder can give you both, that's a good sign they've done this before.
You can find builders on TALD and look through their complete project galleries before you ask for a quote.
How Much Should You Spend on a Kitchen Renovation?
A realistic budget starts with your home's value. The traditional rule says to spend 5% to 15% of it on a kitchen. In 2026, many full-featured mid-range renovations cost closer to 15% to 25%.
For example, for a $400,000 home, the old rule gives a budget of $20,000 to $60,000. At the 2026 figure of 15% to 25%, the same home gets $60,000 to $100,000, which is what a full-featured remodel often runs in many areas.
It's worth keeping your neighborhood in mind so you don't over-improve. A $150,000 kitchen in a $350,000 neighborhood rarely pays off when you sell.
As for what you get back when you sell, major kitchen remodels recoup about 36% to 51% of their cost. Smaller projects do better. Minor kitchen remodels returned close to 113% in Zonda's Cost vs. Value 2025 report.
How to Save Money on a Kitchen Renovation
The least expensive way to redo a kitchen is to keep the layout and refresh the surfaces. These steps help at any budget:
- Keep the existing footprint: moving plumbing or walls adds design time, permits and more trades.
- Reface or paint cabinets: this saves 30% to 50% compared with new cabinets.
- Use semi-custom cabinets: they can give you much of the look of full custom for less.
- Mix finish levels: spend more on cabinets and counters, because you use them and see them every day. Save by choosing appliances one level down.
- Keep appliances that still work: replace them over time instead of all at once.
- Buy cabinets early: ordering your cabinets early locks in the price, so tariff changes won't raise your cost.
- Get several quotes: compare builders, and ask each one where a different material could give the same look for less. Good builders are very good at this kind of value engineering.
Planning early helps too, because you can catch problems like tight clearances or the need for filler panels during design, not during installation. The same goes for faucets. Each one comes with plumbing parts that go inside the wall, and your builder will need those parts early on.

Interior Design: Henley / Photography: Jared Kuzia
DIY vs. Hiring a Contractor
Doing some work yourself can cut labor costs on the easier jobs. Demolition and painting fall in that group, and so do a tile backsplash and installing a garbage disposal.
For plumbing, electrical, gas, structural work and cabinet installation, it's worth bringing in a professional. Mistakes in these areas are costly and can be unsafe.
For larger projects, you'll want a general contractor to run the job. If you're gutting your kitchen but putting everything back where it was, you usually won't need an architect. If you're moving walls, plumbing or a gas line, you often will. Our guide to architect costs explains what that adds.
Final Thoughts
Most kitchen renovations in 2026 run $15,000 to $75,000. Three things move your number the most. The first is scope, especially any layout changes. The other two are your material choices, with cabinets the biggest single cost, and local labor rates. Planning your cabinets early and keeping a 10% to 20% buffer for surprises behind the walls will set you up well.
Your next step depends on your scope. If you're keeping the layout and need the work priced and built, find a builder on TALD. If you want help with the layout, cabinets and finishes before you collect quotes, book a free intro call with an interior designer on TALD to share your plans and budget and see if it's a fit.

![How Much Does Interior Design Cost? [2026 Guide]](https://blog-images.tald.co/cdn-cgi/image/width=800,quality=90,fit=scale-down,format=auto/how_much_does_interior_design_cost_hero_639b7efde1.jpg)
![How Much Does an Architect Cost? [2026 Guide]](https://blog-images.tald.co/cdn-cgi/image/width=800,quality=90,fit=scale-down,format=auto/how_much_does_an_architect_cost_hero_5b284fc61c.jpg)
![How Much Does a General Contractor Charge? [2026]](https://blog-images.tald.co/cdn-cgi/image/width=800,quality=90,fit=scale-down,format=auto/how_much_does_a_general_contractor_charge_hero_c988fd0198.jpg)